- dogs remote training system with LCD display
- 300 meters remote range
- 4 work modes: Vibration, Strong Vibration, Beep, Light
- Adjustable nylon strap (18cm to 60cm) suitable for most small and medium dogs
- 100 levels of vibration
- 100% Humane & safe: No harmless to your dog
- Length: 68mm Height: 35mm Width: 38mm
- Collar length adjustable from 35cm to 58cm
- Weight: 60g (module + battery)
- Power: 2 x 1.5V AAA battery (included)
- Length: 22mm Height: 128mm Width: 40mm
- Weight: 65g (with battery)
- Power: 2 x 6v batteries (included)
- LED signal light and illumination at night
- The sound function for attracting attention
How to operate this product?
1. Install the battery (included) into the transmitter, then, LCD screen turns on automatically.
2. In channel 1 (control the first pet, you can see Number 1 on the right corner of the LCD screen), please press "MODE" button to choose different modes, and press the right side button of the transmitter to set Vibration level (1-100).
3. Sound and Light cannot be set because they are at default level.
4. Press "1/2" Button to set the second pet Vibration level (1-100), you will go into channel 2, and you can find Number 2 on the LCD screen.
5. Control the First Pet in Channel 1. Open one collar cover and install 2 X 1.5V batteries, then, the collar will beep. Please DO NOT set the cover first. Then, please press "Y" button to operate Vibration and Sound functions. Please press "Light" Button to operate light function.
6. Control the Second Pet in Channel 2. Open another collar cover and also install batteries, then, the collar will also beep. Please ALSO DO NOT set the cover. Please operate it as the same as in Channel 1.
IMPORTANT: Make sure match the transmitter and collar in 10 seconds when you hear the First Beep, or, you will match them again. If you do not match the transmitter and collar in 10 seconds, you will hear the Second Beep, that means the time exceed.
7. The transmitter will go into STANDBY MODE if not operated for 2 minutes, and will TURN OFF if not operated for 5 minutes.
8. In STANDBY MODE, press any button (except LED light button) to wake it up. To TURN ON the transmitter, hold "MODE" button at least 5 minutes.
Any collar worn for extended periods can cause a condition similar to bedsores, know as Pressure Necrosis. To reduce the possibility, you must do the following:
1. Never leave the collar on pet for more than 12 hours per day.
2. Examine the pet's neck daily for any signs of a rash or a sore.
3. Supervise your pet during the first 2 days of training.
4. Check the fit to prevent excessive pressure; you should be able to insert one finger between the color strap and your pet's skin.
5. The lifetime of the batteries vary according as how often you use the product. Therefore you should often check the batteries by hearing the beep from the collar and watching the indicator sign on the LCD screen of the transmitter.
6. The valid distance of remote control means the straight line distance between the transmitter and the collar without obstacles in between.
7. This product is for pet training, the pet can understand the intention of its owner, and good effect can only be achieved after a period of training.
8. Training sessions should be kept positive and short, about 10-15 minutes long each time.
9. Presently, the product is the most affective and safest tool for training pet. Following the correct operational instructions, you can effectively train the pet and bring in on harm.
10. Please take out the batteries if you do not use it for a long time.
- 1 x Remote transmitter
- 1 x Receiver collar
- 1 x 4LR44 6v batteries
- 2 x AAA battereis
- 1 x Instruction
- Please allow up to 2-3 weeks for delivery
- No pickup