Product Description

50pcs Level Wedges Tile Spacers for Flooring Wall Tile Carrelage Tile Leveling System Leveler Locator Spacers Plier

Feature:

1. Wear resistant, recyclable.

2. It is easy to operate DIY.

3. Keep tile balance in the same horizontal position.

4. Improve the installation speed of ceramic tile.

5. Reduce fatigue / stress of installation personnel.

6. Reduces the need for grinding and polishing.

7. Prevent tiles from moving during curing.

Specification:

Material: high quality PP + stainless steel

Scope of application: bricklayer

Applicable brick gap: 2-6mm/0.07-0.23''

Applicable tile thickness: 5-17mm/0.19-0.66''

Size: 72 * 36 * 36mm/2.83*1.41*1.41''

Tips for use:

1. Lay the first tile, leaving more than 2 mm (for use with cross gaskets). Close to the tiles.

2. Insert T-pins along the gap between the tiles.

3. Then rotate 180 degrees and the t-pins are stuck at the bottom of the two tiles.

4. Adjust the cover with a hand / special wrench until both tiles are on the same level.

5. About 5-6 hours after leveling, before the cement / adhesive is completely dried, rotate the cover in reverse direction, take out the 180 ° T-shaped needle until the word is filled, and take out.

Avoid not removing the t-tile leveling system:

1. Tile gasket is 2mm or above (cross gasket is recommended).

2. When leveling, the cement or tile adhesive around the t-straightener must be cleaned.

3. About 5-6 hours after leveling, remove t-straightener before tile adhesive or cement is completely dried.

Package Includes:

50pcs Level Wedges Tile Spacers

Note:

1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!

2. Please allow 1-2cm measuring deviation due to manual measurement.